(Release - 7.5.21.02.16) 1. Acceleration of work when referring to commands: Properties, Information, etc. 2. Added the ability to generate different ciphers for the same parts - when installing N shelves (when using in general settings the option "Make new code of copied objects") - when installing N identical facades (a new option in the Set facade group command "New code (even for identical ones"). If the option is disabled, then facades with the same height have the same cipher, as before) - when installing boxes on such facades, a different code is formed for assembly - box - in the Build settings new options assembly *** when inserting facades "If there are several - new for everyjne (even for the same)" *** when inserting boxes "If several - new for each (otherwse the same)" Error correction 1. Editing variables in bases - Edging database, Bench Tops database,Profiles database. 2. When opening the project, the file with the message was NOT CREATED "C: \ Users \ Konstrucktor \ appdata \ local \ temp \ tmp.scr": Unable to open file. (Release - 7.5.20.08.17) 1. Export data to CNC. New Object selection - By marks 2. Enroute modul. New. Mortise-tenon connection. Variant grovers and pockets - by pockets contour - as tool path Tool radius for pockets of tenon (Release - 7.5.20.04.02) 1. AutoCAD 2018, 2020, BricsCAD 20 are supported 2. It is opened a multidocument mode for AutoCad. Now two and more DWG-files can be opened in one Autocad application (before you had to run two and more Autocad application to work with some files at the same time). 3.It is realized the list of "last opened files" and selecting file to open from it. 4. The starting of application, commands "File\New", "File\Open", "Database\Change database" are revised. Now they works greatly quickly. 5.!!! Note. AutoCAD 2010-2011 are not supported now. 6. Fixed errors Errors in Quotation. -paid operation "witout calculation" attached to BENT SHEET; -paid operation "Length of cut (with angle) ages" attached to PARTs; -paid operation "Quantity of holes (filter)" attached to "Catalogue of project composition". Error was appear if hole "Rectangle with rounded corners" was in project. (Release - 7.5.19.11.22) 1. It is revised functions working with network path database. Quotation, Drawing, Cam-module work greatly quickly with such database. 2. Updated command "Save user settings". 2.1. Settings are saved by path ...KM5/TMP/SAVED. Inside specified folder is created new folder by current date. All settings are saved in it. For example 25_12_19. The old settings backup is not deleted. 2.2. If backup is not completed, alarm message will be given. Alarm message include database path. 3. Database\Fasteners and fittings\RTA with double-ended bolt is updated. Unsymmetrical item can be created. Parameters "À4" and "À4_" are present now. (Release - 7.5.19.09.26..) 1. Pull-down menu "New commands" In "New commands" menu will be automatically included all new commands that was realized by software developer in current release. Menu customization completed by user will be stored after software update (before menu was updated by every release) If you want update software menu completely, "3dc.mnu" and "3dc.cuix" files have to be deleted before software update. These files are placed by path ...3D-Constructor 7E\Support\ 2. New command: Service\User menu. You can load pull-down menus and toolbars created by user that are saved in *.mnu or *.cuix files. 3. New command: "Database\Database encryption" Database encryption allows to protect Door database, Drawer database and Typical models database. Encrypted models can’t be used by other users (encryption password is saved in license key) Note. This is extra paid service. 4. New commands "Service\User settings\Save" "Service\User settings\Restore" These commands allow to save and transfer user settings from one PC to another PC. It can be saved and restored -user setting files (total settings, global variables, logical materials, project composition) -quotation reports -drawing settings and stamps -CAM-module settings -CSV output settings 5. New command "Operations\Part operations\Edging\Replace edging" 6. Revised command "Operations\Part operations\Joints cuts grooves\ option "*blind (not through)". Now blind groove can be asymmetrical. NOTE. To have asymmetrical groove on PC where was installed release 7.5.19.08.28 and older, user have to edit "...KM5\km_set2.ls0" file on it PC himself. Should be changed parameter "O1FL" The old status: ("O1FL" 32) - symmetrical blind groove The new status: ("O1FL" 96) - asymmetrical blind groove (Release - 7.5.19.08.28) 1. AutoCAD 2019 is supported 2. The file name generated by CAM-module now can include name of part (see "Configurable name" algorithm). (Release - 7.5.19.03.22) 1. It is changed part dimension calculation for parts that should be pre-milled. The new parameter is realized: Service\Settings\Parts and Sheets "Max deviation in full edge length that allows to pre-mill edge" (if you have rectangular part and do small chamfer, or small cut on a side, or small cut on a corner, the rectangular part will be premilled, edged and then will be done chamfer or cut) The edge, that must be pre-milled, satisfies two conditions: -length of part edge with edging is more or equal "Edge minimal length to be pre-milled" -cut length or chamfer length on part edge should be less then "Max deviation in full edge length dimension that allows to pre-mill edge" (Release - 7.5.18.12.25) 1. BricsCAD19 is supported 2. Database\Fasteners and Fittings\Screw "H2" parameter is added. If "H2" more then zero, the hole is not through. 3. "It is possible to add position with door size for "Framed door" like for usual Part on Assembly view. 4. New setting: Service\Settings\General settings "Prohibit the summation of the identical parts" If it is activated every identical part will be send to Quotation, CAM-module, cutlis as unic part (without summation). 5. The commands that insert drawer in the project "By part-cabinet walls (EXT.)" and "By part-cabinet walls (INT.)" watch for variable "SZ1" in drawer. If "SZ1" is present in drawer and it is inserting in project by above mentioned commands, the variable will be automatically inserted in "Z" parameter of reference. 6. New setting: Service\Settings\General settings "Concatenate COMMENT to the NAME field". If it is activated, fields COMMENT and NAME fields of database is concatenate in quotation. 7. "Informational size" object is revised. For new users text of Informational size will be defined by the first extension line and dimension line. Before text always was parallel to screen. To have an old or new state you can edit file "...KM5\km_set2.ls0" by hand. -old state: ("O80FL" 0) -text always is parallel to screen -new state: ("O80FL" 1) -text position is defined by extension and dimension lines 8. Leaders (positions) on the Assembly Views are revised. If you specify edge of part, part leader (position) is created. If you specify empty place inside Assembly, Assembly leader (position) is created. (before only Assembly leader was able to be created) To activate new position mode users with an old settings file, should edit file mentioned below by hand. "...KM5\km_set4.ls0" new parameter must be added ("CHFL2" 2) (Release - 7.5.18.09.14) 1. Some new milling sections are entered in "Cutter profile database". 2. "Texture directory" is revised. Some new materials can be imported from specified folder at the same time. 3. Edging database is revised. Edging with zero thickness can be added in database (Release - 7.5.18.08.03) 1. New typical calculations are added - Routing of external part contour (filter) - Quantity of holes (filter) - Manual EDGING (filter) - Machine EDGING (filter) - All EDGING (filter) - Parts square (filter) - Parts perimeter (filter) 2. Checking the integrity of the database when writing to the database (sometimes users camplained that database corrupted after editing) 3. If you use ViewCube tool to define view of model and select one of orthogonal views (top, left, bottom and other), the coordinate system will be automatically set "by view 4. CSV output is renewed. 4.1.It is added new output fields. 4.2. It is possible automatically generate several output files (if you specify material identifier in output file name, every material will be outputted in separate file) (Release - 7.5.18.04.16) 1. Renewed database format: -Blocks with overall dimensions -Blocks miscellaneous -Miscellaneous hardware Every above mentioned database has six planes for processing (before was only three) 2. Fixed error in the Project Tree (double click on part). The error was found fore Autocad 2014, 2015, 2016 and other modern version. (Release - 7.5.18.01.26) 1. BricsCAD V18 is supported 2. Parameter "H1" is added in Database\Fasteners and fittings\ RTA connectors (minifix). If H1=0, it value is calculated automatically. If H1>0, it's value defined by user in database. 3. The algorithm of finding processing from "Blocks with overall dimensions" to parts is changed. The first hole of hole group defines the part that will be processed by all holes of group